Fill level control miho Newton X2Z

To check the fill level for any underfilling and overfilling in bottles and beverage cans, regardless of the product or the label (metal foil is also possible).

The measurement is based on an X-ray technology especially developed for this purpose. By using a line detector (fill level measurement range: 20mm), it is possible to accurately inspect any underfilling or overfilling with just one inspection head. Minimum radiation exposure, since pulsed X-ray radiation is only generated at the short moment of measurement. The radiation emission is typically below the naturally occurring levels in enclosed spaces.

Comprehensive statistics for individual types of faults are available. A serial fault detection is implemented. Connection to an external production data acquisition system is possible.

The inspection head can be adjusted by using the handwheel height adjustment. The point of installation is normally at the outfeed of the filler or at the outfeed of the labelling machine.

Accessories & modifications

To detect the presence of a metal cap (crown cork, screw cap) via an inductive proximity switch. Including height adjustment for different bottle heights.
Automatic request of the specially prepared and marked test bottles to check the flawless operation of the inspection machine. The test bottles are marked with reflection foil (One sheet of reflection foil 230mm x 100mm is included. The test cycle of the test bottle request is based on time and freely adjustable. Free selectable signal output for the test bottle request. Logging of the last test bottle run in the inspection system and, as an option, in the production data acquisition software miho Awes, incl timestamp (not included).
For detecting the presence of a plastic cap by means of a width measurement of the cap diameter. Suitable for glass bottles and PET bottles. Including height adjustment for different bottle heights.
Additional sensors to record and inspect the presence of natural cork by means of a light sensor. Including height adjustment for different bottle heights.
Label Inspection Unit miho EC 2 to detect the presence of labels directly in the labelling machine, on the aligned bottle..
Filler Monitor miho FM 2, stainless steel electronic cabinet, to locate incorrect filling due to defect filling valves.
Software package for the production data acquisition software miho AWeS. All production data, counters and test bottle protocol are logged according to the Weihenstephan standard. For all miho systems based on the miho VIDIOS® or miho MASTER® platform.

Software package for the remote visualization of the operating condition, the parameter and the camera images on an authorized computer. Monitoring of e.g. counters and malfunctions. Monitoring and remote control of the inspection machine by a miho service engineer, re-entry and optimization of the inspection parameters, exact and fast analysis of errors.

Brochure: Fill level control
miho Newton X2Z

Would you like to know more about our fill level control miho Newton X2Z?